-
waypoint v2 actions set FocalLength parameter
-
drone head YAW from OSDK waypoint v2 to the first point after takeoff
-
With OSDK hotpoint_mission, is it possible to get the positional relationship between the drone and the hot point?
-
Occasionally uploading fails when there are many waypoint mission in waypoint v2
-
How to set cruise speed in waypoint v2?
-
How to set the parameters of waypoint mission(v1) and actions?
-
When A3 flight controller uses OSDK3.9 to develop waypoint missions, the set waypoint status callback function is not triggered?
-
In OSDK waypoint v2, setting interval time to take pictures is invalid
-
Is it possible to call OSDK camera manager API during the execution of OSDK waypoint v2?
-
When OSDK is executing a waypoint mission, is it possible to interrupt the waypoint mission and send instructions to land or return home?
-
How to set waypoint action hover in waypoint V2?
-
What is the unit of OSDK waypointV2AssociateTrigger.waitingTime?
-
How to set the parameter “dampingDistance ” value in OSDK DJIWaypointV2FlightPathModeCoordinateTurn?
-
Is it possible for the M300 to obtain the execution status of waypoint actions during the execution of waypoint V2?
-
How does waypoint v1 judge the waypoint mission is complete?
-
OSDK waypoint V2, the waypoint action is triggered by association. When multiple waypoint actions are linked to the same waypoint action, the aircraft will hover when executing the waypoint action
-
Why is the value of data.waypointIndex obtained by waypoint v2 callback incorrect?
-
OSDK 4.0.1 + MANIFIND2-G + M300 RTK will report an error when rotating the gimbal during waypoint action
-
During the execution of DJI OSDK4.0 waypointV2, how do I determine which waypoint has been reached?
-
Waypoint V2 prompts an error: "waypoint damping distance exceed set range"
-
OSDK4.x, using ROS demo, after executing the waypoint V2 mission node, an error will be reported when restart the node again
-
What is the OSDK out-of-control logic during OSDK 4.x waypoint missions?
-
The GPS signal at the take-off location is weak, how to start the waypoint mission?
-
How does OSDK4.X M210 V2 series drone obtain the status of waypoint mission execution
-
Using the setWaypointEventCallback function, the index of the waypoint can be output when each waypoint is reached, but there is no output when flying between two waypoints.
-
waypoint v2 executes waypoint actions out of order
