The OSDK control flight waypoint mission reported an error: limit exceeded

Keywords: flight restriction, waypoint mission takeoff error report, limit exceeded

1. When the OSDK controls the flight, take off will check the connection of the remote control and the APP. If the remote control and APP are not connected to the drone and OSDK controls to take off, there will be a 50m radius and 30m high flight area restriction. If the distance exceeds this distance, it will hover. If the waypoint mission exceeds this range, an error:  limit exceeded will be reported when uploading the mission point.

2. After the drone takes off, it needs to be checked again when the drone restarts and takes off

3. A3/N3 has no such limitation, M600/M210/M300 has this limitation

Note: This article is from Chinese and is translated by machine. If there is any error, please point it out and we will correct it in time