Dji
- 活动总数 25
- 最后的活动
- 成员加入日期
- 正在关注 0 名用户
- 关注者数 0 名用户
- 投票数 2
- 订阅数 9
活动概览
Dji 的最新活动-
Dji 创建了一个帖子，
H20 series get H.264 streamsource or event by stream source change via RC / enable or disable IR split view
已完成Hello,I can set the H20 stream source with the DjiCameraManager_SetStreamSource() command. If the H20 stream source is switched by RC is there any event I can monitor or any function llike DjiCamer...
-
Dji 创建了一个帖子，
Which PSDK version for H30 / H30T support?
已完成Hello,which version of PSDK supports / will support the DJI H30 / H30T on DJI Matrice M300 RTK and DJI Matrice M350 RTK?If supported with PSDK 3.9.0 are the enums for the camera stream identical to...
-
Dji 创建了一个帖子，
PSDK V3.5 / M300 RTK / FTDI FT4232H - UART issues
已完成Hello, I'm using an FTDI FT4232H to connect to the UART port of the DJI M300 RTK. The USB part of the connection is fine. In Ubuntu I see the USB Ethernet with an interface name enxd2e780cae600 (it...
-
Dji 进行了评论，
libavcodec-dev is version 5.1.3-1
-
Dji 创建了一个帖子，
PSDK 3.5 on Debian 12 --> avcodec issues
已完成Hello,I've setup a new develpement environment. Which is based on Debian 12.When I compile the PSDK 3.5 demo applications there is a problem in the dji_camera_stream_decoder.cpp.The output of cmake...
-
Dji 进行了评论，
Can be closed. It works but the changeH264source function had a better video ouput at the time of switching.
-
Dji 进行了评论，
Thank you for the answer. It solved the issue.
-
Dji 创建了一个帖子，
OSDK 4.1 Gimbal rotate sync -> strange rattling noise on H20T but not on Z30
已完成Hello,I'm using a C++ program to control the gimbal. When the Z30 is connected, the movement is smooth without any strange sound. When the H20T is connected, the movement has a rattling sound whic...
-
Dji 创建了一个帖子，
PSDK v3.5 equivalent function for OSDK changeH264Source()
已完成I have to switch between the H20T H264 streams while the video stream is running. It can be triggered by the RC (wide, room, IR) and works fine.In the OSDK 4.1 there was the function changeH264Sour...
-
Dji 创建了一个帖子，
PSDK V3.5 / M300 RTK with H20T and Z30 - GetCameraType only works for main position
已完成Hello,both cameras are connected to main mount position (H20T) and vice mount postion 2 (Z30). Both are working in the liveview sample. If I try to get the camera types in a loop. Only the first ca...