PSDK V3.5 / M300 RTK / FTDI FT4232H - UART issues

已完成

评论

1 条评论

  • DJI Developer Support
    PSDK runs on the M300 OSDK port, there will be baud rate auto-negotiation, that is, there is no need to set the baud rate of the drone, the PSDK will use different baud rates to try to communicate with the drone, and finally the drone baud rate will be set to the baud rate specified by PSDK code. Set the baud rate on the DJI Assistant2 Onboard SDK interface same as the PSDK code, it will skip the negotiation.
    0
    评论操作 固定链接

请先登录再写评论。