Adrian Escalona
- 活动总数 23
- 最后的活动
- 成员加入日期
- 正在关注 0 名用户
- 关注者数 0 名用户
- 投票数 0
- 订阅数 9
帖子
Adrian Escalona 最近的活动-
M300RTK E-Port PSDK Error
已完成Good day, Following the "Quick start" guide for E-Port development using Raspberry Pi I've got the following error calling Dji_InitCore: chmod: cannot access '/dev/ttyACM0': No such file or directo...
-
Connect E-Port to PSDK port in M300
已完成Good day, Is it possible to connect Raspberry Pi (PSDK 3.8) using E-Port through PSDK port instead of OSDK port in M300 RTK? And M350 RTK? Thanks!
-
DJI PSDK Fail to compile on Raspberry Pi 4B (aarch64)
已完成Good day, Following the steps in https://developer.dji.com/doc/payload-sdk-tutorial/en/quick-start/quick-guide/raspberry-pi.html. After installing all the dependencies, when I run from root 'Payloa...
-
Can MSDK app run parallel to DJI Pilot 2 for M300/350 (RTK)? And with DJI RC Plus/Pro?
已完成What title says, Can MSDK app run parallel to DJI Pilot 2 for M300/350 (RTK)? If it can't, can it be done with DJI RC Plus/RC Pro?
-
Get Zenmuse L2 Point Cloud Data
已完成How to get real-time Zenmuse L2 point cloud data on MSDK?
-
PSDK process real-time Zenmuse L2 point cloud (M300 RTK)
已完成Good day, How can I process real-time point cloud data from Zenmuse L2? We want to get real-time L2 data and send it to third-party server to visualize and/or process this data in real-time (e.g. A...
-
How to get what Waypoint is the drone flying to?
已完成Hello, We are using WaypointV2Mission with OSDK 4.1. Is there any feature which allows to get what waypoint is the drone flying to? For example, let's assume I upload a 3-waypoint mission to M300. ...
-
Connect two onboard computers (OSDK) simultaneously via UART and USB
已完成Hello, Is it possible to connect two onboard computers (two independent OSDK instances) via the M300 expansion module UART and USB? Although simultaneous OSDK api control was not possible due to co...
-
OSDK 4.1 (or master branch) compilation failure
已完成Good day, Just after cloning the OSDK (either '4.1' or 'master' branch), compiling the OSDK results in a failure due to two errors (attached below). Steps to reproduce: git clone https://github.com...