Vision positioning sys off + 4.16 iOS MSDK virtual sticks issue

已完成

关注

gerardo cervantes

• 2022年04月12日 00:57

Disabling the DJI M300 RTK visual positioning system causes erratic aircraft behavior when the aircraft is taken over via virtual sticks, the aircraft should be hovering but it rocks back and forth with no command going to the aircraft. Can you please assist with this?  https://we.tl/t-BXKeBU3N1R ( Media link will expire in 7 days)

0

• 

  DJI Developer Support

  • 2022年04月12日 03:18

  Could you upload your video to this link please? https://pan-sec.djicorp.com/s/XBaaPxqnEyqbXKr dji123

  0

  评论操作 固定链接
• 

  gerardo cervantes

  • 2022年04月12日 05:16

  Video has been uploaded. 
  
  The video demonstrates the aircraft (M300) performing the rocking back and forth when no input is provided via the virtual sticks. The expected behavior is to have the aircraft just hover in place.

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2022年04月13日 02:59

  You can try enabling the Virtualstick Advanced Mode.Here is related articles：Why the aircraft cannot hover in air when using virtual stick?

  0

  评论操作 固定链接
• 

  gerardo cervantes

  • 2022年04月18日 16:07

  DJI team, 
  
  We are still experiencing flight behavior issues with the M300 and 4.16.1 iOS MSDK with the latest firmware. 
  
  

  We have verified advanced virtual sticks are being used and always have been.

   

  When the following properties are set on the DJI Pilot app the drone flies stable with no issue. When we set the properties through the MSDK, the unstable flight behavior continues. We tested setting these values while on the ground and in the air.
  flightAssistant.setPrecisionLandingEnabled

   

  flightAssistant.setLandingProtectionEnabled

   

  The drone is not controlable, when these settings are not enabled. 

   

  0

  评论操作 固定链接
• 

  Michael Guo

  • 2022年04月19日 04:05

  Hi Gerardo,

  Have you ever tested with our official iOS Sample? 

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2022年04月20日 06:38

  We would like you to provide us with the flight control logs to help us analyse them. You can read the documentation in the link to find out how to export the flight control logs and then upload the logs to the link. Also, we asked some of our colleagues what this behaviour was generally related to and they replied that it was related to the status of the IMU, so you could keep an eye on the HMS(DeviceHealthInformation )for error messages and the status of the IMU. link:https://pan-sec.djicorp.com/s/e7AgCTKoZ4wLqE8 password:dji123

  0

  评论操作 固定链接
• 

  William Wong

  • 2022年04月27日 09:52
  • 已编辑于

  We cannot find a valid flight controller log. It only contains one record and we cannot find any fly status in 2022.4.25 22：08 for time zone 0. 

  

   

  0

  评论操作 固定链接

请先登录再写评论。