No connection between the RC and Raspberry Pi via WiFi

评论

7 条评论

  • DJI Developer Support
    Hello, we have noticed the problem you described, but unfortunately, the part you inquired about does not involve any SDK, which may be beyond the scope of our SDK technical support. We may not be able to provide a more accurate answer or reference-worthy information for the issue you mentioned.
    0
    评论操作 固定链接
  • Ernesto David Oliva Pérez

    Can you tell me who to contact?

    0
    评论操作 固定链接
  • DJI Developer Support
    Hello, we can transfer you to the MSDK team to see if we can provide you with some suggestions or ideas, but since it does not involve MSDK related content, please understand that we can only try our best to help you analyze it, but cannot guarantee a perfect solution.
    0
    评论操作 固定链接
  • Ernesto David Oliva Pérez

    So you're telling me it's not possible to run what I want on DJI controllers?

    0
    评论操作 固定链接
  • DJI Developer Support
    Could you please let us know if you have assigned a static IP address for the RC? What is the IP address?
    0
    评论操作 固定链接
  • Ernesto David Oliva Pérez

    Please be advised that no special settings have been made on the controller. Devices connecting to the Raspberry will have IPs in the range 192.168.100.2 to 192.168.100.20. In the previous instance of this error occurring, the IP address assigned to the controller was 5.

    0
    评论操作 固定链接
  • yating.liao

    The IP address 192.168.100.0/24 is disabled, and it is recommended that you try other addresses for testing. Please avoid using the IP addresses shown in the image below.

    0
    评论操作 固定链接

请先登录再写评论。