yating.liao
- Total activity 318
- Last activity
- Member since
- Following 0 users
- Followed by 8 users
- Votes 4
- Subscriptions 189
Articles
Votes on activity by yating.liao-
Why does turning the gimbal yaw axis cause the aircraft to rotate?
The head has three rotation modes, namely Free, Yaw_Follow and FPV. Only the aircraft supporting Free mode can turn the head alone, the other modes are to change the Yaw axis of the aircraft to ach...
-
How to achieve forced aircraft landing?
【Situation】 If the aircraft detects that the ground environment is not suitable for landing, it will hover in the air, then the user needs to confirm before the aircraft can finish landing on the g...
-
Why is the information obtained about the unlocked zone incomplete?
There are two ways to get the unlocked information, one is to pull the unblock information from the server to the account application, i.e. reloadUnlockedZoneGroupsFromServer; the other is to get t...
-
How to configure WaypointV2's waypoint actions?
WaypointV2Action is divided into three parts: ActionID, Trigger and Actuator.ActionID is a unique identifier for the waypoint action and must be unique in the waypoint action list.Trigger, or Waypo...
-
Does the assistant 2 simulator simulate a no-fly and height-restricted environment?
No, the emulator cannot simulate the above environment.
-
What type of PSDK speaker can be controlled by IMegaphoneManager?
IMegaphoneManager only supports speakers that use the PSDK standard solution. The PSDK has a new standard speaker feature since version 3.1. This feature provides a standard speaker solution that c...
-
How do I set a homepoint using KeyHomeLocation?
M300 RTK: The distance between the new homepoint and the initial homepoint needs to be within 20km. Mavic 3 Enterprise Series and M30 Series: The distance between the new homepoint and the aircra...
-
How do I get the accelerometer and gyroscope offsets?
In the Pilot we can read the accelerometer and gyroscope offsets as follows: In MSDK, we can try to read the offset of the accelerometer using imuState.getAccelerometerValue and the offset of the ...
-
How do I set the warning distance?
The horizontal, lower and upper warning distances can be set by the setMaxPerceptionDistance. The range of distances in each direction is shown below.
-
Why can I not select the baud rate on Assistant 2?
If you are facing the problem that you cannot select the baud rate when you reach the Onboard SDK page after connecting the aircraft to Assistant 2, please check the version information of the Assi...