hexueming
- Total activity 31
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 3
- Subscriptions 11
Activity overview
Latest activity by hexueming-
hexueming created a post,
怎么查看机场日志
由于某些原因(Aircraft unable to land on dock. Dock cover closed or driving rods pushed into place. Check aircraft status on dock deployment site.) 我的飞机没有飞回机场 在外面丢失了;我现在拿到了机场的日志想获取原因;但是日志的格式是tar.gz.lz.en...
-
hexueming commented,
我按你这么操作 返航依然是边水平移动 边升高;有没有办法让他先升高到返航高度 再返航
-
hexueming commented,
您好 您回复中的截图所示的时序图指令; 我并没有看到截图
-
hexueming created a post,
返航时 无人机并非先垂直爬升到返航高度 再返航 这是什么原因?
我在下发航线任务时,设置字段rth_altitude = 200 ;在航线文件中设置globalRTHHeight=50;在返航时,并非飞行器返航时,先爬升至该高度,再进行返航;而是边飞往机场 边升高高度;请问怎么实现飞行器返航时,先爬升至该高度,再进行返航
-
hexueming created a post,
发送变焦命令camera_focal_length_set 返回错误码327010是什么原因
Completed我在执行航线任务时,切换直播镜头为zoom,接着抢占负载控制权,然后发送变焦命令camera_focal_length_set,返回错误码327010。请问是什么原因? 下面是请求参数: send topic: thing/product/7CTDM1L00B7B00/services, payload: TopicServicesRequest{method='camera_focal_l...
-
hexueming commented,
包是这两个,升级时 无人机机场都开机了
-
hexueming commented,
你好 我这边尝试升级固件,在官网下载了最新的10.01.1604的固件文件,一个是机场的 一个是M3DT的 然后调用导入固件接口 最后调用固件升级接口结果报错ota_progress ===> Error: {errorCode=312001, errorMsg=Consistency Upgrade was trrigered, but device didn't request.};文...
-
hexueming commented,
固件版本都是10.00.0609
-
hexueming created a post,
2代机场M3TD无人机 在航线中设置了全景拍照,但没有拍摄
Completed普通拍照可以,但是全景拍照不行;看了下航线文件内容,也是有这个动作的;请问是什么原因
-
hexueming created a post,
自己建立的航线文件下发给无人机报错:314016 航线文件解析失败,无法执行飞行任务,请检查航线文件
我按照大疆的航线文件标准格式创建航线文件,通过创建任务下发航线给无人机,无人机最终在flighttask_progress消息中报错:314016 航线文件解析失败,无法执行飞行任务,请检查航线文件。我对比了司空二导出的航线文件,发现司空2导出的航线文件有很多标签是文档中没有的,于是我将这些标签也加入到了我自己绘制的航线中,但最终结果还是一样的错误。我最后对比了两个文件,发现除了航点动作不一...