ObstacleData when using simulation

Completed
Follow
Lorenzo Lucignano

Hello,

I'm using MSDK 5 with a M30T. I noticed that when I start the simulation (via code or via DJI Assistant 2), the reading I get from the IPerceptionManager are not valid. This makes really hard to test behaviours when an obstacle is present. Is there any way to overcome this problem? Thanks

0

Comments

7 comments

Date Votes
  • DJI Developer Support
    There is no way to achieve normal obstacle avoidance performance for the aircraft in a simulated state. We usually place the aircraft on a table for testing, and at that time, the aircraft is often very close to the table and objects on the table, so it will ban avoid obstacles while hovering in the simulator. On the other hand, the simulator currently does not have the functionality to simulate obstacles.
    0
    Comment actions Permalink
  • Lorenzo Lucignano

    I agree that having obstacle avoidance behaviour would not be easy in simulation. But I would like at least to have the sensing active (aka get the reading from the sensors) without having any safe behavior (like braking etc).

    0
    Comment actions Permalink
  • DJI Developer Support
    In the simulator environment, it is possible to read sensor data. Which aircraft are you using?
    0
    Comment actions Permalink
  • Lorenzo Lucignano

    M30T. I can read it, but it does not correspond to real values anymore. You can clearly see a switch when the Aircraft is ON without simulation active (readings are correct) and when ou start the simulation.

    0
    Comment actions Permalink
  • DJI Developer Support
    I have tested it and everything is functioning properly. The firmware version of the M30T is 10.00.0608. Here is the video:https://pan-sec.djicorp.com/s/pzCzGE6bfrpNfR6
    0
    Comment actions Permalink
  • Lorenzo Lucignano

    I checked and you are right, sorry. It's just that the readings in a room ar ereally spoiled by the enviroment

    0
    Comment actions Permalink
  • DJI Developer Support
    No worries at all! I hope this helps you continue with your development.
    0
    Comment actions Permalink

Please sign in to leave a comment.

Didn't find what you were looking for?

New post