MOP通道初始化失败

Completed
Follow
liujiawei
    • MOP通道监听初始化失败

    [33.258][channel]-[Error]-[DjiMopChannel_Accept:555) Operation is not supported in current state. Suggestion : Please try again later.
    [33.258][user]-[Warn]-[DjiTest_MopChannelFileServiceAcceptTask:314) [File-Service] mop accept channel error :0x000000E4
    [35.266][channel]-[Error]-[DjiMopChannel_SocketLinkReconnect:777) connect failed, ret:-1, errorCode = 113
    [36.258][channel]-[Error]-[DjiMopChannel_Accept:555) Operation is not supported in current state. Suggestion : Please try again later.
    [36.258][user]-[Warn]-[DjiTest_MopChannelRecvNormalTask:238) mop accept channel error :0x000000E4
    [36.258][channel]-[Error]-[DjiMopChannel_Accept:555) Operation is not supported in current state. Suggestion : Please try again later.
    [36.258][user]-[Warn]-[DjiTest_MopChannelFileServiceAcceptTask:314) [File-Service] mop accept channel error :0x000000E4
    [38.334][channel]-[Error]-[DjiMopChannel_SocketLinkReconnect:777) connect failed, ret:-1, errorCode = 113
    [39.258][channel]-[Error]-[DjiMopChannel_Accept:555) Operation is not supported in current state. Suggestion : Please try again later.
    [39.258][user]-[Warn]-[DjiTest_MopChannelRecvNormalTask:238) mop accept channel error :0x000000E4
    [39.259][channel]-[Error]-[DjiMopChannel_Accept:555) Operation is not supported in current state. Suggestion : Please try again later.
    [39.259][user]-[Warn]-[DjiTest_MopChannelFileServiceAcceptTask:314) [File-Service] mop accept channel error :0x000000E4
    [41.406][channel]-[Error]-[DjiMopChannel_SocketLinkReconnect:777) connect failed, ret:-1, errorCode = 113
    [42.258][channel]-[Error]-[DjiMopChannel_Accept:555) Operation is not supported in current state. Suggestion : Please try again later.
    [42.258][user]-[Warn]-[DjiTest_MopChannelRecvNormalTask:238) mop accept channel error :0x000000E4
    [42.259][channel]-[Error]-[DjiMopChannel_Accept:555) Operation is not supported in current state. Suggestion : Please try again later.
    [42.259][user]-[Warn]-[DjiTest_MopChannelFileServiceAcceptTask:314) [File-Service] mop accept channel error :0x000000E4
    [44.478][channel]-[Error]-[DjiMopChannel_SocketLinkReconnect:777) connect failed, ret:-1, errorCode = 113
    [45.258][channel]-[Error]-[DjiMopChannel_Accept:555) Operation is not supported in current state. Suggestion : Please try again later.
    [45.258][user]-[Warn]-[DjiTest_MopChannelRecvNormalTask:238) mop accept channel error :0x000000E4
    [45.259][channel]-[Error]-[DjiMopChannel_Accept:555) Operation is not supported in current state. Suggestion : Please try again later.
    [45.259][user]-[Warn]-[DjiTest_MopChannelFileServiceAcceptTask:314) [File-Service] mop accept channel error :0x000000E4

0

Comments

5 comments

Date Votes
  • DJI Developer Support
    您好，您这个主要是文件传输线程无法连接，您可以检查下MSDK程序是否有打开，另外自己的BULK/NETWORK链路是否正常。如果是bulk链路，可以简单做个BULK的回环测试压测看看。该文章最后的部分；树莓派4B配置USB device RNDIS 和 BULK
    0
    Comment actions Permalink
  • zqh

    请问你解决了吗， 我遇到跟你一样的问题， 使用的是network链路

    0
    Comment actions Permalink
  • liujiawei

    不过我走usb bulk走不通。用usb或网线的network链路都ok

    0
    Comment actions Permalink
  • zqh
    • Edited

    那你后面怎么调好的， 我现在运行官方示例就会打印上面那些内容

    我psdk跑在rk3588上， psdk版本3.9.2， msdk版本5.11.0

     
    0
    Comment actions Permalink
  • liujiawei

    我是更换链路解决的，本来一开始所有链路都能通，到后面usb bulk突然不能用，你可以试试用网线和usb都走network，或者就直接用usb bulk，用网线的话在实际应用中意义不大

    0
    Comment actions Permalink

Please sign in to leave a comment.

Didn't find what you were looking for?

New post