Skyport Backpower Protection

已完成

关注

AM

• 2022年04月13日 19:14

Hi there,

Does the Skyport V2 circuitry have backpower protection? E.g., The Skyport is attached to a system with two connected input power methods (1 is the Skyport and 2 is a barrel port). If the system is supplied with power to the (2) barrel port then power can flow into the (1) Skyport (and the connected Matrice). Is there circuitry in the Skyport V2 or the Matrice that will prohibit this current from flowing into the Matrice??

Thanks,

AM

0

• 

  DJI Developer Support

  • 2022年04月14日 06:26

  First of all, the skyport circuitry has backpower protection, but I may not understand what you mean about the "two power methods". Could you please explain in detail what your two port refer to in conjunction with the diagram? Does it means port1 and port2 ? Only one port of these two can be used to connect payloads at the same time. 

  0

  评论操作 固定链接
• 

  AM

  • 2022年04月14日 14:27
  • 已编辑于

  Thanks for the information about backpower protection.

  One input power system comes from Port 1 on the Skyport. The other power system comes through an external method - a DC barrel port. Both are connected to the same electronics.

  You may mark this as "Completed"

  0

  评论操作 固定链接

请先登录再写评论。