Issue with DiagnosticsKey.SYSTEM_STATUS Not Updating at Critical Battery Level for M300 on MSDK v4.17

已完成

评论

4 条评论

  • DJI Developer Support
    Could you provide us with some information? 1. What does the critical level of the battery refer to? 2. What is the current status displayed on the official App? We have not received similar inquiries before, so it should not be a known issue.
    0
    评论操作 固定链接
  • Vlad Groshkov
    1. The critical charge of the battery is in terms of MSDK4 - Serious Low Battery Warning Threshold;
    2. In the official app I saw the red message in the status bar - "Unable to takeoff";
    0
    评论操作 固定链接
  • DJI Developer Support
    If the value obtained by MSDK is different from the official app, this could be a problem. What is the value you obtained on MSDK? Can this issue be consistently reproduced? What is the critical low battery threshold you have set?
    0
    评论操作 固定链接
  • Vlad Groshkov

    The battery percentage was set to 37%.
    An android test was written that reproduces this problem: Serious Low Battery Warning Threshold is reached, but at the same time, a new "Ready to go (GPS)" status comes from the MSDK within 2 seconds.
    This problem is always can be reproduced.

    0
    评论操作 固定链接

请先登录再写评论。