Drone crashed | M3T | MSDK 5.8

已完成

关注

Jonathan Gabbay

• 2024年04月16日 07:49

Hi, drone crashed for one of our customers.

I would like to share the info of that mission with you, and the HMS status.

In the photo above, the green route represents the given mission route (WPML) and the red route represents the flight route - until RC signal is lost.

Before and during the flight, the HMS showed this:

Sensor system error (0x16010007). Land promptly warningLevel=WARNING

Sensor system error (0x16010010). Restart aircraft warningLevel=WARNING

Yet, the mission was started with no issue and no interrupt occurred.

This is urgent, we can't allow our customers to fly and risk their drones.

Any idea what happened?

0

• 

  DJI Developer Support

  • 2024年04月16日 12:54

  Greetings! The information provided may not be sufficient to explain the aircraft's flight trajectory. Do you have access to the user's waypoint mission file? Can this file reliably reproduce the issue? Sensor errors can indeed affect the aircraft's performance. If the issue cannot be reliably reproduced with the user's mission file, I recommend contacting support@dji.com to request an analysis of this incident.

  0

  评论操作 固定链接
• 

  Jonathan Gabbay

  • 2024年04月16日 12:57

  Yes, I see you are new here, welcome!

  I have access to the WMPL file, provide me an upload link and I will share it with you.

  The WPML file is perfectly fine though.

  0

  评论操作 固定链接
• 

  Jonathan Gabbay

  • 2024年04月16日 15:06

  How can I check for sensors errors before / during the flight? What sensors is this error referring to?

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2024年04月17日 09:03

  If you have confirmed that WPML is not the issue and you can use this information to successfully start the waypoint mission, I suggest reaching out to support@dji.com and analyzing the issue from an aircraft execution perspective. If your code or waypoint file is causing the execution issue, it is likely to be reproducible. DeviceHealthManager continuously pushes health information of the device. When you encounter sensor anomalies, you will receive the message "Sensor system error." For IMU and compass, the SDK can monitor their status. IMU status can be monitored using FlightControllerKey.KeyIMUStatus, and compass anomalies can be checked using FlightControllerKey.KeyCompassHasError.

  0

  评论操作 固定链接
• 

  Jonathan Gabbay

  • 2024年04月17日 09:11

  The status retrieved by those keys was ok, I will contact support, thank you

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2024年04月18日 03:32

  I am glad that I could help you.

  0

  评论操作 固定链接

请先登录再写评论。