How to connect to Matrice 350 topside PSDK port
已完成I just need a sanity check on how to connect to the topside PSDK Port on the Matrice 350 RTK.
What I intend to do is:
- Connect to the drone's topside PSDK port using a Matrice 300 Series Upward Gimbal Connector, which provides a SkyPort V2.
- Connect to the upward gimbal connector's SkyPort V2 using the Payload SDK Development Kit 2.0
- Connect to the onboard computer using UART and Ethernet for high-bandwidth data transfer.
Please tell me if I have correctly understood what to do. I am asking to make sure all the connections are correct, and because the Payload SDK Development Kit 2.0 says it is only compatible with the Matrice 200 Series V2 (https://store.dji.com/product/psdk-development-kit-v2) but the the PSDK site says it's compatible with SkyPort V2 connectors in general (https://developer.dji.com/doc/payload-sdk-tutorial/en/model-instruction/choose-hardware-platform.html), so that is confusing.
Please let me know if I have to purchase anything other than
- Matrice 300 Series Upward Gimbal Connector
- Payload SDK Development Kit 2.0
-
Dear Developer, Hello, thank you for contacting DJI. I think your understanding is roughly correct. Sorry, maybe due to problems with the translation software, I will take a few pictures of the kits for you. With these kits, you can connect to the Payload port on the top of the M350 normally. You need to use: Pan/Tilt Bracket. SkyportV2 Kit. Payload 2.0 development kit. development board. Thank you for your support of DJI products. Best Regards, DJI Dajiang innovation SDK technical support
请先登录再写评论。
评论
1 条评论