Is it possible to get the boresight latitude and longitude via the MSDK5?

已完成

关注

Andrew Dittmer

• 2024年02月22日 03:20
• 已编辑于

Hello, I'm wondering if it's possible via the MSDK5 to get the latitude and longitude of the ground position for where the camera is pointing? Is this provided via the MSDK5? Or would we need to do our own calculations for this?

Thanks,

0

• 

  DJI Developer Support

  • 2024年02月22日 10:56

  The SDK itself cannot obtain the latitude and longitude position of a specific point in the camera. However, some cameras have LiDAR, which can roughly obtain the position information of a fixed point in the camera, such as H20.

  1

  评论操作 固定链接
• 

  Andrew Dittmer

  • 2024年02月23日 00:05

  Thank you! When using cameras such as H20, is it possible to retrieve this rough position information?

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2024年02月23日 08:33

  The laser measure function of H20 can obtain the position information of the camera's center of gravity target. It is important to note that there is a certain margin of error in this position. The usage instructions are mentioned at the end of the article：https://sdk-forum.dji.net/hc/en-us/articles/9125637605913-Chapter-9-Camera If you have used laser ranging on Pilot 2, you can better understand this feature.

  0

  评论操作 固定链接
• 

  Andrew Dittmer

  • 2024年02月26日 02:58

  Thank you.

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2024年02月26日 06:38

  Glad to help you.

  0

  评论操作 固定链接

请先登录再写评论。