Mapping C1 & C2 customizable buttons

已完成

关注

Alex Sharper

• 2023年05月10日 22:51

Hello,

I would like to know how to set two digital pins on the M300's OSDK port high when the remote controller's C1 and C2 buttons are pressed. 

Any help would be appreciated.

Thanks!

 

~Alex

 

0

• 

  DJI Developer Support

  • 2023年05月16日 03:48

  The OSDK type C port pins cannot be directly used for GPIO pins. It defined UART, USB, PPS, and VCC/GND and used to connect to the onboard computer, which can be connected to the aircraft based on running OSDK/PSDK to communicate with the aircraft or interact with RC.

  0

  评论操作 固定链接

请先登录再写评论。