M3T OSD Topic missing key's in payload

已完成

关注

Chris

• 2023年02月23日 17:21
• 已编辑于

Home point locations are missing from JSON Payload in the OSD Topic on the Mavic 3T, M30T looks correct. 

0

• 

  DJI Developer Support

  • 2023年02月24日 08:09

  The home point locations are in the state topic, and relevant data can be received through the state.

  0

  评论操作 固定链接
• 

  Chris

  • 2023年02月24日 13:38

  Documentation needs to reflect that on the MQTT aircraft sample. Also is it possible to get the state Incase the aircraft is already taken off or the home point is been set.

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2023年02月27日 04:11

    There are related instructions in the properties of the drone. For state topic, It is reported when the state data changes or the drone starts.

  0

  评论操作 固定链接
• 

  Chris

  • 2023年03月03日 03:53
  • 已编辑于

  When the drone is connecting to the controller the setup of the SDR apparently disrupts the WiFi since the QOS on the MQTT side is 0 instead of 1 and the key is apparently based on a callback triggering the topic to be sent the homepoint state can and has been missed. It should be confirmed or able to be triggered to be sent again.

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2023年03月03日 11:30

  Good idea. At present, it is not possible to manually trigger resend. If there is no receipt, you can try to give a prompt to let the user manually restart the drone.

  0

  评论操作 固定链接

请先登录再写评论。