osdk expansion module support only Manifold 2 ?

已完成

关注

jakapat

• 2023年01月30日 05:42

I use M300 RTK latest version and osdk version 4.1.

osdk expansion module support only Manifold 2 ? I try intel nuc on ubuntu 18.04 os is not work .I try install osdk expansion module use usb ttl found in ls /dev/ but not Execute program , dual a-usb not found in /dev/ACM0 and power of XT30 output not 24 v but is 0.24v( I set baud rate 921600 in Userconfig.txt file and dji assistant 2 version 2.1.3)

thank you.

0

• 

  DJI Developer Support

  • 2023年01月30日 07:45

  The osdk expansion module only expands the OSDK type C to UART, USB and the XT30 port, it is convenient for connection. In addition, the osdk expansion module is compatible with the size of manifold 2, which can be easily installed. There is no binding relationship with Manifold itself. Connect the osdk expansion module to the M300 OSDK type C port and there will be 24V voltage output, if not, it is recommended to check whether the type C terminal is connected tightly.

  0

  评论操作 固定链接
• 

  jakapat

  • 2023年01月31日 03:43

  thank you very much , I will try it again.

  0

  评论操作 固定链接
• 

  jakapat

  • 2023年02月01日 09:08
  • 已编辑于

  I try osdk expansion module form the new one  connect to m300 rtk and check voltage output from XT30 is 0.2 v. help :) 

   

  thank you.

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2023年02月02日 02:04

  As shown in the figure, firmly insert the type C terminal, and then check whether the power supply output has changed. If there is still no 24V voltage output, please apply for the after-sales with this drone. 

  0

  评论操作 固定链接
• 

  bizqsoft

  • 2023年02月04日 08:29

  now , we can got power 24V , by cut out of the protect bar of OSDK extension , to mak it connected tightly.

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2023年02月06日 01:55

  You can apply to the after-sales service to replace the OSDK expansion module.

  0

  评论操作 固定链接

请先登录再写评论。