MSDV Regsiter fail

已完成

关注

Godfrey from Hammer

• 2022年12月07日 12:15

Hi, 

i'm trying to integrate the msdk v5.1.1 to with mavic3 Smart Controller 
But after i call 

SDKManager.getInstance().registerApp()

Its always return For first time registration, app should be connected to Internet. But my application and the smart controller should have the well internet connection. 

FYI - I had try the 5.1.1 sample app on it. The drone keep connect & disconnect and the camera streaming view is very laggy.

Regards, 
Godfrey

 

0

• 

  Godfrey from Hammer

  • 2022年12月07日 13:54

  FYR
  
  My aircraft firmware veresion  05.01.0203
  Controller version  02.00.0210 
  
  

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2022年12月08日 03:12

  The MSDK v5.1.1 only supports Mavic 3 Enterprise series but not Mavic 3. The keep connect and disconnect because you havn't disable the DJI official app, please read the below article link. Link：https://sdk-forum.dji.net/hc/en-us/articles/5318937433497-Why-the-connection-of-RC-Pro-or-RC-Plus-is-unstable-

  0

  评论操作 固定链接
• 

  Godfrey from Hammer

  • 2022年12月08日 18:20

  Thanks very much for your information. 
  
  Beside that i still got one more question about the start simulator 
  
  When i try to start the simulator with the following method 

  SimulatorManager.getInstance().enableSimulator

  sometimes it will return error and only comes with an error code only. May i know where can i find the error code meaning table ? 

   

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2022年12月09日 02:46

  You should get the description of the error and print it out. Normally it is your flight mode switch isn't P or N. You havn't take off.

  0

  评论操作 固定链接
• 

  Godfrey from Hammer

  • 2022年12月12日 12:55

  i didn't got any error message but only the code. Even when i try to start the waypoint mission, its only return error code with "DEFINE11" and "null" in description and "null" in hints

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2022年12月13日 03:47

  I have gotten DEFINE11 sometimes as well. This is because the MSDK hasn't correctly translate the error from the firmware to a human readable message. We are dealing with the error now and it will be fixed in the 5.2.0.

  0

  评论操作 固定链接
• 

  Godfrey from Hammer

  • 2022年12月13日 16:32

  Thanks a lot! look forward to the 5.2.0

  0

  评论操作 固定链接

请先登录再写评论。