Setting up M300 for OSDK usage with DJI Assistant 2

已完成
关注
Michael Sägesser

Hello

I have some troubles setting up my DJI M300 for OSDK usage. I can not set the Baud Rate in the DJI Assistant 2 and it seems like my changes for e.g. GPS transmission rates are not persistent or are not submitted to the M300 as the fields are empty if I restart the M300 or the DJI Assistant 2. Also the Enable API Control Box is unchecked again.

I am using DJI Assistant V2.1.5 and M300 Firmware V04.01.0000. Do I need to downgrade my M300 firmware or am I missing something?

 

Thank you in advance

Yours sincerely

Michael

0

评论

12 条评论

日期 投票数
  • DJI Developer Support
    Because M300 newly supports PSDK 3.x (integrated with the original OSDK function), it is no longer necessary to set OSDK through DJI Assistant2, so the new version of DJI Assistant2 has changed. You can download version 2.1.3 of DJI Assistant2 to use with OSDK 4.1 from the link below. https://pan-sec.djicorp.com/s/CsWyFmR78X6DiFG password：dji123 In addition, we have already reported to the relevant departments that the new version of DJI Assistant2 needs to be compatible with OSDK 4.x, sorry for the inconvenience caused to you.
    1
    评论操作 固定链接
  • Michael Sägesser

    Dear Agent

    Thank you very much, I was able start the examples.

     

     

    0
    评论操作 固定链接
  • jakapat

    Dear Developer Support

    I request the download DJI Assistant2 v2.1.3 again. The file seems to be missing.

    Thank you very much.

    0
    评论操作 固定链接
  • DJI Developer Support
    The link has been reset, please download as soon as possible： https://pan-sec.djicorp.com/s/2qSMENSt5SRswSy dji123
    0
    评论操作 固定链接
  • Jeff

    Dear Developer Support,

    I am also in need of this version of DJI assistant. It currently does not work on the new version.

     

    Thank you very much

    0
    评论操作 固定链接
  • Olli Rinta-Filppula

    Hey,

    I have exact same problem. Saw that link didn't work anymore, can we get a new one?

     

    Thank you!

    0
    评论操作 固定链接
  • DJI Developer Support
    The link has been reset, please download as soon as possible： https://pan-sec.djicorp.com/s/pggY6gZpYHzkdoy dji123
    0
    评论操作 固定链接
  • Olli Rinta-Filppula

    Thank you! Now im able to read data.

    Is there a way to decode when extracting data from manifold extension rx tx port? 

    I have right baud rate and set gps data to send 10hz, but its printing nonsense..

    0
    评论操作 固定链接
  • DJI Developer Support
    Sorry, the serial port protocol is not open to the developers, so the serial port raw data cannot be parsed. Are you unable to communicate with the OSDK now? Is there an OSDK running terminal log?
    0
    评论操作 固定链接
  • Olli Rinta-Filppula

    Its working fine now. But yeah thats unfortunate that we cannot read data straight from serial port.

    0
    评论操作 固定链接
  • Davide Cargnin

    Hello

    I'm having some problems configuring my DJI M300 to use the OSDK.

    I can't check the Enable API Control, Ground Station Status and Enable SDK Failsafe Action boxes.

    I am using DJI Assistant V2.1.6 and M300 firmware V05.01.0100.
    Can you help me?

    Thank you in advance

    Yours sincerely

    Davideca

    0
    评论操作 固定链接
  • Olli Rinta-Filppula

    You need exactly V2.1.3 version. 

    Mega link to it, because DJI doesnt want to provide it to everyone for some reason..

    https://mega.nz/file/vn5VnZ7J#Y0EAr8kdBQ2T9PWASPHimguEuFOgagCmg1Bp4Epvgvc

    -1
    评论操作 固定链接

请先登录再写评论。

没有找到您要找的？

新建帖子