Control M300 RTK using an App developed with WSDK in Manifold 2C

已完成

关注

Panagiotis Skrimponis

• 2022年09月21日 13:47

Hi,

we have an M300 RTK drone with a Manifold 2C. We would like to control the Gimbal from the Manifold. We see that this is possible through the OSDK. However, due to other limitations we need to have Windows installed in the Manifold 2C. Is it possible to use WSDK to write an application to perform this task? or use OSDK to develop a windows app?

Thanks

0

• 

  DJI Developer Support

  • 2022年09月22日 04:18

  The Windows SDK can only be used on a Windows Desktop and Manifold 2C can only running a Linux system. So you have to run OSDK on Manifold 2C.

  0

  评论操作 固定链接
• 

  Panagiotis Skrimponis

  • 2022年09月22日 06:45

  Thank you for your response. We have successfully installed Windows 10 on Manifold 2C. Therefore, this is not an issue. However, my question is weather we can use WSDK to develop an app that can interface with the M300 RTK?

  0

  评论操作 固定链接
• 

  DJI Developer Support

  • 2022年09月22日 08:23

  OK, however the Windows SDK project has been shut down for many years. You can see the Github never updates since 2018. It does not support M300RTK.

  0

  评论操作 固定链接

请先登录再写评论。