Dji
- Total activity 21
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 2
- Subscriptions 7
Activity overview
Latest activity by Dji-
Dji created a post,
PSDK V3.5 / M300 RTK / FTDI FT4232H - UART issues
CompletedHello, I'm using an FTDI FT4232H to connect to the UART port of the DJI M300 RTK. The USB part of the connection is fine. In Ubuntu I see the USB Ethernet with an interface name enxd2e780cae600 (it...
-
Dji commented,
libavcodec-dev is version 5.1.3-1
-
Dji created a post,
PSDK 3.5 on Debian 12 --> avcodec issues
CompletedHello,I've setup a new develpement environment. Which is based on Debian 12.When I compile the PSDK 3.5 demo applications there is a problem in the dji_camera_stream_decoder.cpp.The output of cmake...
-
Dji commented,
Can be closed. It works but the changeH264source function had a better video ouput at the time of switching.
-
Dji commented,
Thank you for the answer. It solved the issue.
-
Dji created a post,
OSDK 4.1 Gimbal rotate sync -> strange rattling noise on H20T but not on Z30
CompletedHello,I'm using a C++ program to control the gimbal. When the Z30 is connected, the movement is smooth without any strange sound. When the H20T is connected, the movement has a rattling sound whic...
-
Dji created a post,
PSDK v3.5 equivalent function for OSDK changeH264Source()
CompletedI have to switch between the H20T H264 streams while the video stream is running. It can be triggered by the RC (wide, room, IR) and works fine.In the OSDK 4.1 there was the function changeH264Sour...
-
Dji created a post,
PSDK V3.5 / M300 RTK with H20T and Z30 - GetCameraType only works for main position
CompletedHello,both cameras are connected to main mount position (H20T) and vice mount postion 2 (Z30). Both are working in the liveview sample. If I try to get the camera types in a loop. Only the first ca...
-
Dji commented,
Thank you for the comment. Solved the problem for me!Please extend the PSDK documentation with this hint. It's missing!
-
Dji commented,
Please forget the last two lines of the cmake output. The one before I did with sudo. So the cmake .. is without any issue.