TaeHyunKim
- Total activity 33
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 5
- Subscriptions 11
Activity overview
Latest activity by TaeHyunKim-
TaeHyunKim commented,
The problem was solved when updating to version 4.16.5-alpha. May I know the official service date of version 4.16.5?
-
TaeHyunKim created a post,
[MSDK 4.16.4] Error (code: 180), cannot take off, please contact DJI support.
CompletedI am developing an app with dji msdk.Error Developed with MSDK 4.16.4 version.An error has occurred and the drone is not operating.The DJI Pilot app also doesn't work with the same phenomenon. Is t...
-
TaeHyunKim commented,
please check
-
TaeHyunKim commented,
I did the same as the dji documentation, but AFC mode does not work. Even if you check the dji smaple source, AFC mode does not apply. Even if you check "CameraKey.KeyIsAFCSupported" in H20 camera ...
-
TaeHyunKim commented,
Hardcoded CameraFocusMode as AFC for test code private val key = CameraKey.KeyCameraFocusMode.create()KeyManager.getInstance() .setValue(key, CameraFocusMode.AFC, object : CommonCallbacks.Comple...
-
TaeHyunKim created a post,
[MSDK V5] CameraFocusMode AFC setValue Error
Completeddrone : M300RTK camera : H20 LensMode : Zoom AFS or MF is applied.In AFC mode, dji Error occurs. ErrorImp{errorType='CORE', errorCode='INVALID_PARAM', innerCode='', description='null', hint='err...
-
TaeHyunKim created a post,
[DJI MSDK 5.2.0] How to create a Waypoint V3 file
CompletedThe dji sample also lacks information. help 1. Can waypointV3 be run only with kmz files? V1 and V2 are provided by dji to create waypoints, but V3 is not provided? 2. Can developers create kmz, km...
-
TaeHyunKim created a post,
[DJI MSDK 5.2.0] What is the difference in controller signal quality?
CompletedAirLinkKey.KeyUpLinkQuality AirLinkKey.KeyUpLinkQualityRaw 1. Which key should I use to display the controller signal strength? 2. The sample uses the "KeyUpLinkQualityRaw" key. What's the difference?
-
TaeHyunKim created a post,
[DJI MSDK] Why does an error occur when recording L1 camera lidar?
Completed"The Canera's SD Card if full" warning occurs when recording is started immediately after stopping the L1 camera recording.Recording is not performed. The camera capacity is sufficient. The same th...
-
TaeHyunKim commented,
5. setAutoFlightSpeed is to set the speed of the whole mission. MSDK WaypintV2 You cannot set Speed for each piont.What I am curious about is that the speed changes for each section in the DJI Piot...