Tmay
- Total activity 10
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 3
Activity overview
Latest activity by Tmay-
Tmay commented,
Thank you for your response. I have ordered a USB-C to USB-C OTG cable. I did not understand the capabilites of the Jetson Orin USB bus and I did not have the correct usb cable for my device to bec...
-
Tmay commented,
I have ordered a C to C OTG cable to try with the Orin's usb C Port. I will report back to this thread and leave future readers hanging.
-
Tmay commented,
My thoughts keep going back to this "USB 2.0 (USB bulk transfer) or Rndis (TCP/IP over USB) functions, we should use the USB_DP pin (B6) and USB_DM pin (B7)."does this mean I need to use a full fea...
-
Tmay commented,
Hey Me Too.I am seking help here for the same issue, but on the M350 with and Jetson Orin Nano.https://sdk-forum.dji.net/hc/en-us/community/posts/28868828620825-MOP-Channel-Issues-with-M350-Drone-a...
-
Tmay commented,
I said "usb_gizmo" but I meant "usb_gadget" ^ up there ^ it's the config that gets written into `/sys/kernel/config/usb_gadget/l4t/`
-
Tmay commented,
after some initial research it seems a "Full Featured" usb cable might be needed.Here is so more information on my problem, I continue update the thread with anything I think can help solve the iss...
-
Tmay created a post,
MOP Channel Issues with M350 Drone and Jetson Orin Nano via E-Port
CompletedHello DJI Community, I am currently integrating an M350 drone with a Jetson Orin Nano through the E-Port for a project. While I've had success with UART communication and serial over ACM0, I am enc...