cheney.zeng
- Total activity 368
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 2
- Subscriptions 203
Activity overview
Latest activity by cheney.zeng-
cheney.zeng created an article,
Analysis of abnormal flight data of WP or virtual stick function
In the WP or virtual stick function, when the aircraft suddenly hovers in flight or other abnormal phenomena, the cause is not confirmed and what troubleshooting needs to be done. The following pr...
-
cheney.zeng created an article,
M2EA photo proportion, whether adjustable
Thermal imaging camera photo ratio 5:4. Visible light camera photo ratio 4:3. Both of them are not adjustable.
-
cheney.zeng created an article,
The height limitation to the ground for WayPoint
When fly the WP function, the aircraft will limit 2m to the ground for safety. And whether the relative height of the aircraft could be set as negative, it depends on different aircraft types, it`s...
-
cheney.zeng created an article,
Pinout description of the connector on PSDK skyport
1.For Skyport v1 version, you could download the documentation from below link and check the related skyport connector pinout description，it`s in the \payload-sdk-doc-1.0\documentation\cn\introduct...
-
cheney.zeng created an article,
What is the red TOP symbol means on UXSDK element?
It means there is an obstacle on top of the aircraft. We suggest you check the environment.
-
cheney.zeng created an article,
The RC master/slave mode setting on M300
The MSDK API for setting the RC master/slave mode is not supported on M300, it only could be set on DJI Pilot app.
-
cheney.zeng created an article,
Remove text input widget of PSDK
Remove the text input widget of the PSDK custom widget function, you only need to go to the json file, and set the text_input_box ->"is_enable" value as false. Shown as below.
-
cheney.zeng created an article,
The RTK coordinate location in PSDK positioning function
The geometric center point of the aircraft, that is, the horizontal center point, intersects the vertical center point, which is roughly shown below.
-
cheney.zeng created an article,
Errors on MSDK app when using MOP
MOP Connect error - pipeline error the target device refuses to connect . Error Code=-10017 Please check it as following steps: 1, Whether to use the original DEMO. https://www.github.com/DJI-Mobil...
-
cheney.zeng created an article,
PSDK data transmission between gimbal port
Data transmission between two PSDK ports on the M300 is not supported, including network port data and UART data. The ReceiveDataFromPayload interface provided by PSDK3.0 only transfers data be...