Ernesto David Oliva Pérez
- Total activity 38
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 7
- Subscriptions 17
Activity overview
Latest activity by Ernesto David Oliva Pérez-
Ernesto David Oliva Pérez commented,
Please be advised that no special settings have been made on the controller. Devices connecting to the Raspberry will have IPs in the range 192.168.100.2 to 192.168.100.20. In the previous instance...
-
Ernesto David Oliva Pérez commented,
So you're telling me it's not possible to run what I want on DJI controllers?
-
Ernesto David Oliva Pérez commented,
Can you tell me who to contact?
-
Ernesto David Oliva Pérez created a post,
No connection between the RC and Raspberry Pi via WiFi
Our network configuration includes a Raspberry Pi 4 B+ with a 2.4GHz hostpot using IEEE 802.11g (WPA2-PSK). In addition, we have the RC PRO and the RC Plus. An API has been created in the Raspberry...
-
Ernesto David Oliva Pérez commented,
How to obtain the “current_focal_length” and the “minimum_focal_length” ?
-
Ernesto David Oliva Pérez commented,
I think there has been a misunderstanding. PSDK to MSDK communication, i.e. the PSDK sends messages and the MSDK receives them, is the communication with which the frequency with which data is sent...
-
Ernesto David Oliva Pérez commented,
Ok, I will take this recommendation into account and will let you know with the results. I would just like to know if when you talk about "app" do you mean MSDK side, PSKD side or both?
-
Ernesto David Oliva Pérez commented,
PSDK to MSDK -> Information is sent without controlling how frequently it is sent, i.e., it is sent as fast as possible. In the MSDK there are approximately 5 messages per second. MSDK to PSDK -> T...
-
Ernesto David Oliva Pérez commented,
Is there any way to know if the MSDK has recognized a PSDK device? If when you say “data transmission rate exceeds the limits of the transmission link” you are referring to the baud rate, my collea...
-
Ernesto David Oliva Pérez commented,
What do you mean when you say “correct object to process this instruction”? This error does not appear with any specific situation. We have an M350 with an E-port connected. We have a Raspberry Pi ...