ht
- Total activity 34
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 7
- Subscriptions 10
Activity overview
Latest activity by ht-
ht commented,
The problem disappeared after updating the firmware!
-
ht created a post,
When flying a mission at night with dock2, the beacon is turned off.
CompletedWhen flying a mission at night with dock2, the beacon is turned off. So I turned on the beacon through the topic “thing/product/{gateway_sn}/property/set”. But then the flight started and the beaco...
-
ht commented,
1. Connect to our server as a third party 2. Confirm that the OSD of dock2 is delivered. 3. Activate debug mode 4. Drone power on After doing this I expected the drone's OSD to come in. But it di...
-
ht created a post,
m3td does not deliver osd
Completedhello,We have dock2 and m3td updated to the latest version. In "flighthub2", drone information (OSD) is communicated well.However, when connecting to our third party server, Dock2 information (OSD)...
-
ht commented,
Does the content on this page (https://developer.dji.com/doc/cloud-api-tutorial/en/api-reference/dock-to-cloud/mqtt/dock/dock1/drc.html#payload-control-start-capturing) match what you referred to a...
-
ht commented,
Is there any other method besides DRC control to upload photos in real-time? Could you please provide information on alternative methods. and I'm curious if it's possible to execute the 'flyTo' act...
-
ht created a post,
Is it possible to transmit photos while the drone is in flight?
CompletedI am writing to inquire whether there is a method available to view drone-captured photos in real-time before they arrive at the dock.
-
ht created a post,
charging a drone battery at the dock
hello. When charging a drone battery at the dock, if one side is at 90% and the other side is at 50%, is it possible to charge only the side that is at 50%?
-
ht created a post,
battery warning threshold. where can I check?
CompletedHello, 1. The values "low_battery_warning_threshold" and "serious_low_battery_warning_threshold" are not included in the drone's OSD. Where can I check it? 2. When executing a mission, I have exp...
-
ht commented,
Sorry for not checking the document properly. thank you for telling me.