Connection the "DJI Assistant 2" and Matric 300RTK

Completed

Follow

Shigeo Tominaga

• October 06, 2021 02:52

We would like to start developing MATRICE 300RTK controls using OSDK.

This might be basic, but could anybody tell us about how to connect "DJI Assistant 2" to MATRICE 300RTK?

We installed the "DJI Assistant 2" to the PC and started it, the message "How to connect to Inspire2?" was displayed.

Next, we connected the USB port of the PC and Assistant Port of the MATRICE 300RTK,
the result was same.

Please advise if there is any mistake in the connection method or procedure.

Thank you.

0

• 

  DJI Developer Support

  • October 08, 2021 11:35

  Please check and ensure that the DJI Assistant2 version is for matrce, and the dowonload link is: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice and use USB cables connects the drone PORT 25(M300_RTK_User_Manual) and PC.  Could you please provide the screenshot of DJI Assistant2? In addition, the connection between DJI Assistant2 and the drone related to the device connections. It is recommended that you check whether the drone has been recognized through the device management on the PC (windows) side, when the USB is connected and the drone is turned on. If it is not recognized, you can directly contact the product after-sales service: support@dji.com

  0

  Comment actions Permalink
• 

  Shigeo Tominaga

  • October 11, 2021 01:45

  I was able to solve this problem with your advice.

  （It was due to the version of Assistant2.）

  Thank you for your support.

  0

  Comment actions Permalink
• 

  Eric B

  • November 01, 2022 14:35

  I cannot find the version 2.1.3 for DJI assistant 2 (enterprise) anywhere to connect from 3rd party computer to the M300RTK, where can this be downloaded from as I have read there are incompatibility issues with 2.1.4 and OSDK 4.0. Any help would be appreciated! 

  0

  Comment actions Permalink

Please sign in to leave a comment.