司空2使用take off起飞以后，飞机上升到指定高度以后，自己降落无法悬停在设置的高度

分享服务器上的日志有如下两个问题：

1，枚举错误导致的异常
Caused by: com.dji.sdk.exception.CloudSDKException: com.dji.sdk.mqtt.state.DockStateDataKeyEnum has unknown data: [[cameras]]
Caused by: com.dji.sdk.exception.CloudSDKException: com.dji.sdk.mqtt.state.DockStateDataKeyEnum has unknown data: [[camera_watermark_settings]]
Caused by: com.dji.sdk.exception.CloudSDKException: com.dji.sdk.mqtt.state.DockStateDataKeyEnum has unknown data: [[rtcm_info]]
Caused by: com.dji.sdk.exception.CloudSDKException: com.dji.sdk.mqtt.state.DockStateDataKeyEnum has unknown data: [[uom_real_name_state]]
Caused by: com.dji.sdk.exception.CloudSDKException: com.dji.sdk.mqtt.state.DockStateDataKeyEnum has unknown data: [[flysafe_database_version]]
Caused by: com.dji.sdk.exception.CloudSDKException: com.dji.sdk.mqtt.state.DockStateDataKeyEnum has unknown data: [[commander_flight_mode]]
Caused by: com.dji.sdk.exception.CloudSDKException: com.dji.sdk.mqtt.state.DockStateDataKeyEnum has unknown data: [[wireless_link_topo]]
Caused by: com.dji.sdk.exception.CloudSDKException: com.dji.sdk.mqtt.state.DockStateDataKeyEnum has unknown data: [[air_transfer_enable]]

Caused by: java.lang.IllegalArgumentException: Cannot construct instance of `com.dji.sdk.cloudapi.debug.RemoteDebugStepKeyEnum`, problem: com.dji.sdk.cloudapi.debug.RemoteDebugStepKeyEnum has unknown data: [close_drone]

2.错误编码和含义：
0 无命令
14 应用程序强制破坏保护
2 低电压
4 RC_CONTROL
1 低功率
17 低功率RTH
3 严重低压
9 返航点太近
10 返航点太远
11 执行航路点任务

请求解答，谢谢！

司空2使用take off起飞以后，飞机上升到指定高度以后，自己降落无法悬停在设置的高度

Comments

Didn't find what you were looking for?