- Make sure your 3rd party app and DJI Pilot are installed in the remote controller.
- Firstly start DJI Pilot.
- Secondly start 3rd party app.
Note:
- You must start DJI Pilot first because it will kill all background apps when started.
- This method is marked as a bug but currently there is no fix plan, please be noted.
- It won't work if you install them inside a mobile device because the USB port can be occupied by one app only.
- Only support Mavic 2 series and M300RTK.
- For RC Pro and RC Plus, DJI Pilot 2 and 3rd party app cannot control the aircraft simultaneously and do not support external device connection.
Comments
2 comments
Thank you for the article. On point 4 there is written that this solution/bug works with the matrice 300 RTk that comes with the RC Pro remote controller with the DJI pilot 2 (app version 4.1.1.14) and point 5 says that will not work with the DJI pilot 2 on this remote controller. So It will work or not?
So, can I use DJI Pilot to flight the drone and my application that collects data from a sensor attached to the drone? Works on M300 and M350?
Please sign in to leave a comment.